1

00:00:00,335  -->  00:00:04,115
In the previous video, we have learned about
trunk.

2

00:00:04,591  -->  00:00:09,510
Next in this video, we are going to create
one more topology,

3

00:00:09,796  -->  00:00:13,796
let’s say we will create topology for room 3.

4

00:00:14,544  -->  00:00:16,538
Let’s import a new switch.

5

00:00:17,109  -->  00:00:24,167
But I will not use 2960 again, I will use
3560.

6

00:00:25,092  -->  00:00:32,599
Actually this two switch is similar, but there
are some differences between this two switch.

7

00:00:33,252  -->  00:00:37,235
We will talk more about the differences in
the next video.

8

00:00:38,649  -->  00:00:42,000
Then now let’s add 4 pc like before.

9

00:00:42,896  -->  00:00:51,986
To add some pc at once, here we can type ctrl
or control in the keyboard, click the pc,

10

00:00:52,422  -->  00:00:57,938
release the control button and here we can
add some pc at once.

11

00:01:01,148  -->  00:01:11,119
Now let’s change the name of the pc, here
the last pc is pc 10, so this will be pc 11,

12

00:01:11,935  -->  00:01:18,413
pc 12, pc 13 and last pc 14.

13

00:01:19,270  -->  00:01:22,393
Now let’s connecting the pc to the switch.

14

00:01:23,264  -->  00:01:27,519
Here we also can use ctrl to add some cable
at once.

15

00:01:28,076  -->  00:01:34,874
So type ctrl in the keyboard, click on the
cable, release the ctrl.

16

00:01:35,051  -->  00:01:38,655
And now we can connecting all pc to the switch.

17

00:01:43,539  -->  00:01:46,754
Okay, now let’s configure the vlan in the
switch.

18

00:01:47,367  -->  00:01:52,715
Here we get a question, would you like to
enter the initial configuration?

19

00:01:53,014  -->  00:01:55,061
We can choose no here.

20

00:01:55,592  -->  00:01:59,125
Enable, and then configure terminal.

21

00:01:59,683  -->  00:02:07,773
Let’s create the vlan first, vlan 10 the
name is accounting, and then vlan 20,

22

00:02:07,922  -->  00:02:09,884
the name is marketing.

23

00:02:10,456  -->  00:02:12,061
Let’s verify it.

24

00:02:12,455  -->  00:02:14,152
Do show vlan brief.

25

00:02:15,000  -->  00:02:20,243
Okay here we can see that now we have vlan
10 and vlan 20.

26

00:02:20,801  -->  00:02:25,125
But all of the interface is still in the vlan 1.

27

00:02:25,574  -->  00:02:33,655
Now let’s assign fa0/1 and fa0/4 to the
vlan 10.

28

00:02:34,988  -->  00:02:41,260
If you remember in the previous video, we
can use interface range to assign some interface

29

00:02:41,260  -->  00:02:43,062
to the vlan at once.

30

00:02:43,960  -->  00:02:51,200
Let’s say here we want to assign fa0/1 and
fa0/2 to the vlan.

31

00:02:52,288  -->  00:03:02,565
And if we use interface range fa0/1 until
4, so fa0/1, fa0/2, fa0/3,

32

00:03:02,565  -->  00:03:05,451
fa0/4 will be assigned to the vlan.

33

00:03:06,000  -->  00:03:14,359
But in this case, we only want to assign the
interface fa0/1 and fa0/4.

34

00:03:15,000  -->  00:03:21,640
Because fa0/2 and fa0/3 is in the vlan 20.

35

00:03:22,171  -->  00:03:33,858
To do this, we can use comma, so interface
range fa0/1, fa0/4 like this.

36

00:03:34,701  -->  00:03:41,569
Then switchport mode access, switchport access
vlan 10.

37

00:03:42,957  -->  00:03:44,374
Let’s verify it.

38

00:03:45,789  -->  00:03:47,536
Do show vlan brief.

39

00:03:48,093  -->  00:03:56,723
Okay here we can see that now fa0/1 and fa0/4
is in the vlan 10.

40

00:03:57,431  -->  00:04:04,315
Next let’s assign fa0/2 and fa0/3 to vlan 20.

41

00:04:05,118  -->  00:04:09,282
Interface range fa0/2-3.

42

00:04:09,731  -->  00:04:16,180
Switchport mode access, switchport access
vlan 20.

43

00:04:18,111  -->  00:04:22,016
Let’s verify it again, do show vlan brief.

44

00:04:23,131  -->  00:04:31,967
Okay here we can see that now fa0/2 and fa0/3
is in the vlan 20.

45

00:04:32,770  -->  00:04:44,082
Last, let’s configure the ip address of
all pc. Here for pc 11, the ip address is 192.168.1.11.

46

00:04:44,816  -->  00:04:50,068
pc 12 the ip address is 192.168.1.12.

47

00:04:51,143  -->  00:05:01,685
pc 13 the ip address is 192.168.1.13, and last, pc14

48

00:05:01,685  -->  00:05:06,078
the ip address is 192.168.1.14.

49

00:05:06,976  -->  00:05:11,743
Now let’s test the connection between pc
in the same vlan.

50

00:05:12,233  -->  00:05:15,195
Let’s ping between pc in the vlan 10.

51

00:05:16,161  -->  00:05:22,302
Okay successful, next let’s test between
pc in the vlan 20.

52

00:05:22,968  -->  00:05:25,679
Okay this is also successful.

53

00:05:26,604  -->  00:05:29,177
Okay I think enough for this video.

54

00:05:29,272  -->  00:05:33,408
Here we already create a new topology for
room 3.

55

00:05:34,238  -->  00:05:40,253
In the next video, we are going to connecting
this room 3 with room 1 and room 2.

56

00:05:40,838  -->  00:05:44,446
Thankyou for watching and see you on the next
video.